Fix Video Scheduler Internal Error

The VIDEO_SCHEDULER_INTERNAL_ERROR occurs if you have recently installed new hardware or software which causes conflict between the video drivers and Windows 10. The Video Scheduler Internal Error is a Blue Screen of Death (BSOD) error that indicates that the video scheduler has detected a fatal violation. The error is mostly caused by the Graphics card, and it’s drivers issue and has a stop error code 0x00000119.

When you see the VIDEO_SCHEDULER_INTERNAL_ERROR the PC will usually restart and before this error occurs your PC will most likely freeze for a few minutes. The Display seems to crashes every now & then which seems to be frustrating a lot of users. But before moving forward to the solution to this problem, we must completely understand what is causing this VIDEO_SCHEDULER_INTERNAL_ERROR and then ready to fix this error.

Various causes of Video Scheduler Internal Error:

  • Incompatible, corrupted or outdated Graphics drivers
  • Corrupt Windows Registry
  • Virus or Malware infection
  • Corrupt Windows system files
  • Hardware issues

The Video Scheduler Internal Error can occur any time while working on something important or casually watching a movie but when this error occurs you won’t be able to save any work on your system as you will directly face this BSOD error and after which you have to restart your PC losing all your work. So without wasting any time let’s see how to actually fix this error with the below-listed troubleshooting guide.

Fix Video Scheduler Internal Error

Make sure to  create a restore point  just in case something goes wrong.

Method 1: Run System File Checker (SFC) and Check Disk (CHKDSK)

1. Press Windows Key + X then click on Command Prompt (Admin).

2. Now type the following in the cmd and hit enter:

3. Wait for the above process to finish and once done, restart your PC.

4. Next, run CHKDSK from Fix File System Errors with Check Disk Utility(CHKDSK) .

5. Let the above process complete and again reboot your PC to save changes.

Method 2: Run DISM (Deployment Image Servicing and Management)

1. Press Windows Key + X then select Command Prompt (Admin).

2. Type the following command into cmd one by one and hit Enter:

Dism /Online /Cleanup-Image /StartComponentCleanup
Dism /Online /Cleanup-Image /RestoreHealth

3. If the above command doesn’t work then try on the below:

Dism /Image:C:\offline /Cleanup-Image /RestoreHealth /Source:c:\test\mount\windows
Dism /Online /Cleanup-Image /RestoreHealth /Source:c:\test\mount\windows /LimitAccess

Note: Replace the C:\RepairSource\Windows with the location of your repair source (Windows Installation or Recovery Disc).

4. Don’t run SFC /scannow, instead run DISM command to verify the integrity of the system:

Dism /Online /Cleanup-Image /CheckHealth

5. Reboot your PC to save changes.

Method 3: Uninstall Graphic Card Driver

1. Right-click on your NVIDIA graphic card under the device manager and select Uninstall.

2. If asked for confirmation, select Yes.

3. Type control in Windows Search then click on Control Panel from the search result.

4. From Control Panel, click on Uninstall a Program.

5. Next, uninstall everything related to Nvidia.

6. Reboot your system to save changes and again download the setup from the manufacturer’s website. In our case, we have the NVIDIA graphics card to download the setup from the Nvidia website .

7. Once you are sure that you have removed everything, try installing the drivers again. The setup should work without any problems.

Method 4: Update Graphic Card Drivers

1. Press Windows Key + R then type “devmgmt.msc” (without quotes) and hit enter to open Device Manager.

2. Next, expand Display adapters and right-click on your Nvidia Graphic Card and select Enable.

3. Once you have done this again, right-click on your graphic card and select “Update Driver Software.

4. Select “Search automatically for updated driver software” and let it finish the process.

5. If the above step could fix your problem, then very good, if not then continue.

6. Again select “Update Driver Software” but this time on the next screen select “Browse my computer for driver software.

7. Now select Let me pick from a list of device drivers on my computer.”

8. Finally, select the compatible driver from the list for your Nvidia Graphic Card and click Next.

9. Let the above process finish and restart your PC to save changes. After updating the Graphic card, you may be able to Fix Video Scheduler Internal Error.

If you’re not able to update the graphics driver using the above steps, then you can update graphics drivers using other ways .

Method 5: Run Disk Cleanup

Disk cleanup is a built-in tool on Windows that will let you delete the required unnecessary and temporary files depending upon your need. To run disk cleanup ,

1. Go to This PC or My PC and right-click on the C: drive to select Properties.

2. Now from the Properties window, click on Disk Cleanup under capacity.

3. It will take some time to calculate how much space Disk Cleanup will free.

4. Now click Clean up system files in the bottom under Description.

5. In the next window, make sure to select everything under Files to delete and then click OK to run Disk Cleanup. Note: We are looking for “Previous Windows Installation(s)” and “Temporary Windows Installation files” if available, make sure they are checked.

6. Let the Disk Cleanup complete and then restart your PC to save changes. Again try to run the setup, and this may be able to Fix Video Scheduler Internal Error.

Method 6: Run CCleaner

1. Download and install CCleaner .

2. Double-click on the setup.exe to start the installation.

3. Click on the Install button to start the installation of CCleaner. Follow on-screen instructions to complete the installation.

4. Launch the application and from the left-hand side menu, select Custom.

5. Now see if you need to checkmark anything other than the default settings. Once done, click on Analyze.

6. Once the analysis is complete, click on the “Run CCleaner” button.

7. Let CCleaner run its course, and this will clear all cache and cookies on your system.

8. Now, to clean your system further, select the Registry tab, and ensure the following are checked.

9. Once done, click on the “Scan for Issues” button and allow CCleaner to scan.

10. CCleaner will show the current issues with Windows Registry , click on the Fix selected Issues button.

11. When CCleaner asks “Do you want backup changes to the registry?” select Yes.

12. Once your backup has completed, select Fix All Selected Issues.

13. Reboot your PC to save changes.

This method seems to Fix Video Scheduler Internal Error where the system is affected because of the malware or virus. Otherwise, if you have third-party Antivirus or Malware scanners, you can also use them to remove malware from your system .

Method 7: Make sure Windows is up to date

1. Press Windows Key + I to open Settings then click on Update & Security.

2. From the left-hand side, menu clicks on Windows Update.

3. Now click on the “Check for updates” button to check for any available updates.

4. If any updates are pending, then click on Download & Install updates.

5. Once the updates are downloaded, install them, and your Windows will become up-to-date.

6. After the updates are installed, reboot your PC to save changes.

Recommended:

  • Fix Display driver stopped responding and has recovered error
  • How to Fix Hidden Attribute option greyed out
  • Fix Webcam not working in Windows 10
  • Fix Windows Time service doesn’t start automatically

That’s it you have successfully Fix Video Scheduler Internal Error but if you still have any questions regarding this post then feel free to ask them in the comment’s section.