Display driver stopped responding and has recovered error [SOLVED]

When you use an application or play games, and suddenly it freezes, crashes or exit followed by your PC screen going off and then turning back on again. And suddenly you see a pop-up error message saying “Display driver stopped responding and has recovered” or “Display driver nvlddmkm stopped responding and has successfully recovered” with driver info in details. The error is displayed when Timeout Detection and Recovery (TDR) feature of Windows determines that the Graphics Processing Unit (GPU) has not responded within the allowed time frame and have restarted the Windows Display Driver to avoid a full restart.

The main cause of Display driver stopped responding and has recovered error:

  • Outdated, corrupted or incompatible Display Driver
  • Faulty Graphic Card
  • Overheating Graphics Processing Unit (GPU)
  • TDR’s set timeout is less for the GPU to respond
  • Too many running programs causing the conflict

These are all the possible causes that can trigger the “Display driver stopped responding and has recovered” error. If you started seeing this error more frequently in your system, it’s a serious issue and needs troubleshooting, but if you see this error once in a year, it’s not a problem, and you can continue to use your PC normally. So without wasting any time, let’s see how to actually fix this error with the below-listed troubleshooting steps.

Display driver stopped responding and has recovered error [SOLVED]

Make sure to  create a restore point  just in case something goes wrong.

Method 1: Uninstall Graphic Card Driver

1. Right-click on your NVIDIA graphic card under device manager and select Uninstall.

2. If asked for confirmation, select Yes.

3. Press Windows Key + X then select Control Panel.

4. From Control Panel, click on Uninstall a Program.

5. Next, uninstall everything related to Nvidia.

6. Reboot your system to save changes and again download the setup from the manufacturer’s website.

5. Once you are sure that you have removed everything, try installing the drivers again. The setup should work without any problems.

Method 2: Update Graphic Card Drivers

1. Press Windows Key + R then type devmgmt.msc and hit enter to open Device Manager.

2. Next, expand Display adapters and right-click on your Nvidia Graphic Card and select Enable.

3. Once, you have done this again, right-click on your graphic card and select “Update Driver Software.

4. Select “Search automatically for updated driver software” and let it finish the process.

5. If the above step could fix your problem, then very good, if not then continue.

6. Again select “Update Driver Software” but this time on the next screen select “Browse my computer for driver software.

7. Now. select Let me pick from a list of device drivers on my computer.”

8. Finally, select the compatible driver from your Nvidia Graphic Card list and click Next.

9. Let the above process finish and restart your PC to save changes. After updating the Graphic card, you may be able to Fix Display driver stopped responding and has recovered error.

Method 3: Adjust visual effects for better performance

Too many programs, browser windows or games open at the same time can use up a lot of memory and thus cause the above error. To fix this issue, try to close as many programs and windows that are not in use.

Increasing the performance of your system by disabling visual effects can also help to resolve Display driver stopped responding and has recovered error:

1. Right-click on This PC or My Computer and select Properties.

2. Then click Advanced system settings from the left-hand menu.

Note: You could also directly open Advanced system settings by pressing Windows Key + R then type sysdm.cpl and hit Enter.

3. Switch to Advanced tab if not already there and click Settings under Performance.

4. Now select the checkbox which says “Adjust for best performance.

5. Click Apply, followed by OK.

6. Reboot your PC to save changes.

Method 4: Increase GPU processing time (Registry Fix)

1. Press Windows Key + R then type regedit and hit Enter to open Registry Editor.

2. Navigate to the following registry key:

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\GraphicsDrivers

3. Make sure you have highlighted GrphicsDivers from the left-hand window pane and then right-click in an empty area in the right window pane. Click New and then select the following registry value specific to your version of Windows (32 bit or 64 bit):

For 32-bit Windows:

a. Select DWORD (32-bit) Value and type TdrDelay as the Name.

b. Double click on TdrDelay and enter 8 in the Value data field and click OK.

For 64-bit Windows:

a. Select QWORD (64-bit) Value and type TdrDelay as the Name.

b. Double click on TdrDelay and enter 8 in the Value data field and click OK.

4. Close the Registry Editor and reboot your PC to save changes.

Method 5: Update DirectX to the Latest Version

To Fix Display driver stopped responding and has recovered error, you should always update your DirectX. The best way to make sure you have the latest version installed is to download DirectX Runtime Web Installer from Microsoft’s official website.

Method 6: Make Sure the CPU and GPU are not Overheating

Make sure that the temperature of the CPU and GPU do not exceed the maximum operating temperature. Make sure the heatsink or fan is being used with the processor. Sometimes excessive dust can cause overheating issues, so it’s advised to clean out the vents and graphic card to fix this issue.

Method 7: Set Hardware to Default Settings

An overclocked processor (CPU) or Graphics card can also cause the “Display driver stopped responding and has recovered” error and to resolve this make sure you set the Hardware to default settings. This will ensure that the system is not overclocked and the hardware can function normally.

Method 8: Faulty Hardware

If you’re still unable to fix the above error, then it may be because the graphic card is faulty or damaged. To test your hardware, take it to a local repair shop and let them test your GPU. If it’s faulty or damaged replace with a new one and you will be able to fix the issue once and for all.

Recommended:

  • Fix Hidden Attribute option greyed out
  • How to Fix Default Printer Keeps Changing Issue
  • Fix Webcam not working in Windows 10
  • Fix Windows Time service doesn’t start automatically

That’s it you have successfully Fix Display driver stopped responding and has recovered error [SOLVED] but if you still have any questions regarding this post then feel free to ask them in the comment’s section.